FIRMWARE How to PHONE REVIEW Tech News TUTORIAL

G-Vill Q10 Firmware

Are you looking for the stock ROM firmware of your device G-Vill Q10? If yes your answer, you are on the right page. We have given the direct link to download G-Vill Q10 firmware.

Download G-Vill Q10 stock ROM from here, flash it in your device and enjoy the native Android experience again. The download file contains the USB driver, flash tool, and the scatter file.

Download G-Vill Q10 Firmware

Download G-Vill Q10 Firmware

Stock ROM File Name: G-Vill_Q10_MT6572_20151202.zip
Stock ROM File Size: 483 MB
Android OS Version: NA

Download Now

How To Flash Stock ROM Firmware On Your Device

Step 1: Download the stock ROM zip file given above and extract it on your computer. You will find SP flash tool and Android scatter file after extracting.

Step 2: Now download G-Vill Q10 USB driver and install it on your computer. In case if you have already installed USB driver on your computer skip this step.

Step 3: Next, switch off your G-Vill Q10 smartphone and remove the battery (if it is removable).

power-off-android

Step 4: Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will find “Flash_tool.exe” file in it. Launch it.

stock-rom-flash-process

Step 5: Once SP Flash tool is launched, click on “Download” tab.

stock-rom-flash-process-2

Step 6: Now, click on “scatter-loading” button in the download tab.

stock-rom-flash-process-3

Step 7: Next, click on “Open Scatter File” and select the scatter file from Step 1. For reference see the image given below.

stock-rom-flash-process-4

Step 8: Now click on the “Download” button to start the flashing process.

stock-rom-flash-process-5

Step 9: Next, connect your G-Vill Q10 Android device to your computer through original USB cable (without battery – if it is battery removable) and press volume up or volume down button.

Step 10: The flashing process will begin momentarily, and it will get completed in a minute or two. Once it is over, you will see the “Download OK” green ring in SP Flash Tool.

download-ok-green-ring

Step 11: Now, close SP Flash tool on your computer and unplug your smartphone.

That’s it. Now you have successfully flashed stock ROM firmware on your G-Vill Q10 Android device. If you encounter any issues while following this tutorial, do let me know via comments.

The post G-Vill Q10 Firmware appeared first on Stock ROM Files.