Download Tecno Pouvoir 3 Stock Firmware Flashfile

FACTORY FIRMWARE FLASHFILE FOR TECNO POUVOIR 3

How to Install Stock Firmware Flash Tecno Pouvoir 3:

Download Official Stock Firmware Flash File For Tecno Pouvoir 3 If you own Tecno Pouvoir 3 Smartphone and You want to Download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Tecno Pouvoir 3 lag or has an issue, then flash the Stock Firmware From the list below and save from situation. Stock Firmware doesn’t void a warranty on Your Tecno Pouvoir 3.

Tecno Pouvoir 3 Run on android 8.1 OS Which is Powered by a Mediatek MT6739 Processor. it is a Dual SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G.

The Device Come with 2GB of RAM and 16/32GB of Internal Storage Can be expandable via SD Card.The Device Come with 13MP Primary Sensor With another 13MP Secondary Sensor on The Front For Selfies.

Note-

  • Flashing the ROM Will Erase all Your Personal Data including Storage. So we advice You to First Make a Complete backup of your Phone.
  • Please Do carefully, We are Not Responsible for any Damage to Your Device.
  • Must backup NVRAM using this Guide before Doing anything.
  • Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:

1. backup NVRAM
2. Create a nandroid backup
3. backup Your Personal data

Firmware information:

Product name: Tecno Pouvoir 3
Type: Full ROM
Size: 1.6GB
SoC: Mediatek MT6739
Os: Android 8.1
Password: Null
Root access: Not
Gapps: Included
Product Version: LB7-H393DEF-O-190425V213

Download TECNO POUVOIR 3 LB7-H393DEF-O-190425V213 :

Flash Tools:

  • SP flash tools 5.2 Here

Driver:

  • Mediatek Preloader V-COM Driver Here

How to Install Stock Firmware Flash Tecno Pouvoir 3:

  • First of all Download and Install Mediatek Vcom Driver on Your PC.
  • Download & Extract SP Flash tools Inside a Folder. Run SP Flash tools.exe
  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download Only. Click Download & Connect Your Switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & Switch it On

DMCA.com Protection Status