cracked Tools FIRMWARE How to PHONE REVIEW

Download And Install AOSP Android 11 for Realme 6

Advertisements

Realme 6 (codename: wasabi/RMX2001) launched in March 2020. The handset came with Android 10 Qt. In this tutorial, we will show you how to install the AOSP Android 11 on Realme 6 (wasabi/RMX2001). Recently, Google released its latest stable Android 11 for the general public. And with that, many OEMs were quick to adopt the same. First in the line were the Pixel devices, which were anyways along the expected lines. Later Google released the AOSP source code for Android 11 which is undoubtedly the main ingredient to compile Android 11-based custom ROMs.

Realme 6 sports a 6.5 inch Full HD+ IPS LCD display with a resolution of 1080 × 2400 pixels. The device has an Ultra Smooth display with a screen refresh rate of 90Hz refresh rate. Underneath the Realme 6, it sports the MediaTek Helio G90T which is built on the 12nm process. To the GPU side, this SoC comes with the Mali G76 MC4 GPU. That said coming to the variants in which it is available, it is available in 4, 6, and 8GB of LPDDR4x RAM. It is also available in different internal storage variants such as 64GB and 128GB of UFS 2.1 onboard storage.

Table of Contents

Android 11 and It’s Features:

Well, Android 11, Google’s 11th iteration looks similar to Android 10 but with a handful of new features and changes. The update brings notification history, Chat bubbles, Conversation notifications, screen recorder, new media controls, smart device controls, one-time permission, improved dark theme with the scheduling system, app suggestions, wireless android auto, and many more. For more, check out our article Android 11 supported list, Android 11 Custom ROM list, best Android 11 features, and many more.

Download And Install AOSP Android 11 on Realme 6

Advertisements

How to Install AOSP Android 11 on Realme 6:

With such a long list of goodies to offer, no doubt you will want to try out the AOSP Android 11 on Realme 6 (wasabi/RMX2001). But before we list out the installation steps, please go through the prerequisites section. Make sure your device meets all the mentioned requirements. After this, go through the working features and the list of known issues present in this ROM. Once you have gone through all the requirements section, you may then proceed with the installation steps.

Related Post:

Prerequisites

  • Tested only on Realme 6 (wasabi/RMX2001)
  • First and foremost, create a complete device backup.
  • Next time, enable USB Debugging on your Realme 6. This will make your device recognizable by your PC in ADB mode. So head over to Settings > About Phone > Tap on Build Number 7 times > Go back to Settings > System > Advanced > Developer Options > Enable USB Debugging.
    USB Debugging k20 pro
  • Your device also needs to have the bootloader unlocked. If you haven’t done so, then refer to our detailed guide on How To Unlock Bootloader On Realme 6.
  • Next up, you will also need to install the TWRP Recovery on your device. This will be needed to flash the AOSP Android 11 on your Realme 6. You could refer to our comprehensive tutorial on how to Install TWRP Recovery For Realme 6.

Download AOSP Android 11

Before you download the firmware file, there is a pretty important worth mentioning. You should only use the proper vendor and firmware of your device of stable ROM.

Once you have downloaded the above files, transfer it to your device. Then proceed with the below steps to install AOSP Android 11 on your Realme 6 (wasabi/RMX2001) device.

Warning

Before we begin with this procedure, I would strongly recommend you to create a backup of your device storage and all your files stored on your device. Moreover, it is advised to follow the steps mentioned in this post very carefully to avoid permanent damage or to brick your device. If anything goes wrong the author or GetDroidTips is not responsible for it.

Install AOSP Android 11 on Realme 6 (wasabi/RMX2001)

  1. Connect your device to PC via USB cable. Make sure USB Debugging is enabled.
  2. Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
    cmd platform-tools
  3. Execute the below command in the CMD window to boot your device to TWRP Recovery:
    adb reboot recovery
  4. Now head over to the wipe section and format system, data, and cache. Perform a right swipe to complete the format.

    twrp-custom-rom
    TWRP Home

  5. Its now time to flash the AOSP Android 11 ROM onto your Realme 6. For that, head over to Install, select the AOSP ROM ZIP file and perform a right swipe to install the file.
  6. If you want Google Apps as well, then you need to flash it at this instance itself. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
  7. When that is done, you may reboot your device. Head over to Reboot and select System.
    reboot system twrp

Your device will now boot to the newly installed OS. With this, we conclude the guide on how to install the AOSP Android 11 on Realme 6. Do keep in mind that the first boot might take up some time and you might have to set up your device from scratch.

Furthermore, once you have installed the ROM, do share your opinions about the same in the comments section. Rounding off, here are some iPhone Tips and TricksPC tips and tricks, and Android Tips and Trick that you should check out as well.

Leave a Reply

Your email address will not be published. Required fields are marked *